Laser PRO-1500G MH

Laser PRO-1500G MH

Our Laserworld Proline Laser Moving Heads are adequate for nearly all applications. The especial ness of the system is the in both directions movable head. With these moving heads, you can create space-filling laser shows in big locations, too. Another big advantage of the moving head system is that you can easily change the projection screen. Furthermore, the Laser Moving Head is equipped with the newest 50.000pps scanning system which makes the display of all kind of graphic and beam shows possible! The units, of course, offer an ILDA standard plug to control the laser easily through every standard ILDA laser software. Furthermore, they are equipped with DMX512, too.


Technical specifications:

• Output power: guaranteed: 1250mW; typical: 1500mW / 532nm  GREEN, analogue modulation
  
• Lasers: aircooled laser diode (TEC)
• Laser class: 4
• Beam properties: 3mm/1mrad
• Scanner system: very fast galvo system with excellent projection quality
• Deflection angle: max. 60° optical
• Scan speed: max. 50.000pps
• Control mode: ILDA, DMX 512, automatic mode (sound, stand-alone programmes)
• ILDA: 25pin ILDA Standard Sub-D shaped 25pin connector
• DMX 512: 20 channels
• Basic patterns: 160 (layers, tunnels, fences, animations, graphics, fonts...)
• Effect channels: Rotation, bounce, size, color, slowdraw, stretch & rolling etc.
• Operating range: Pan: 530°  Tilt: 280°
• Resolution: 16bit
• Laser Safety: achieve highest safety standards with 4 integrated safety circuits (IEC 60825-1)
• Display: digital display at the back
• Accessories: Flightcase, power cable, mountings, manual, remote interlock, key.
• Power supply: 110~240V AC  50/60 Hz
• Power consumption: 200W
• Measurements: 539 x 492 x 843 mm (L x W x H)
• weight: 40 kg